The microstructures and properties of TiC dispersed nickel-base alloy were studied in this work. The alloy prepared by powder metallurgical processing was solution treated, 1st-aged at $880^{circ}C$ for 16 hours, and then 2nd-aged at $760^{circ}C$ for 4 hours. Microstucture of sintered specimen showed that TiC particles are uniformly dispersed in Ni base alloy. In the specimen aged at $880^{circ}C$ for 8 hours, the fine $gammaNi_3$(Al,Ti) precipitates with round shape are observed and the very fine $gammaNi_3$(Al,Ti) particles with round shape are precipitated in the specimen aged at $760^{circ}C$ for 4 hours. The presence of ${gamma}$precipitates in TiC/Ni base alloy increased the hardness and wear resistance of the specimen. The hardness and wear resistance of the Ni-base with TiC are higher than those of conventional Ni-base superalloy X-750 because of dispersion strengthening of TiC particles. The hardness, transverse rupture strength and resistance of the specimen 2nd-aged at $760^{circ}C$ for 4 hours are higher than those of 1st-aged specimen due to ultrafine $gammaNi_3$(Al,Ti) precipitates.