In this paper, a novel design concept of frequency doubler using feedforward technique and DGS microstrip line is proposed. The feedforward loop plays a role of fundamental frequency suppression and DGS microstrip line suppresses over the 3rd order harmonic components. By using this new concept, the high suppression for the undesired signals could be achieved easily. The proposed technique is experimentally demonstrated in 1.87 GHz-to-3.74 GHz frequency doubler. The output power of -3 dBm at the frequency of 3.74 GHz(2f$\_$0/) is measured with 42.9 dB suppression of the fundamental frequency signal(f$\_$0/), 20.2 dB suppression of the 3rd harmonic signal(3f$\_$0/) and B9.7 dB suppression of the 4th harmonic signal(4f$\_$0/). The conversion loss of -2.34 dB ∼ -5.8 dB at the bandwidth of 100 MHz, the phase noise of -97.51 dB/Hz(＠10 kHz) were measured.