Electronic Speckle Pattern Interferometry (ESPI) has been recently developed and widely used because it has the advantage of being able to measure surface deformations of engineering components and materials in industrial areas without contact. The speckle patterns formed with interference and scattering phenomena can measure not only the out-of-plane but also the in-plane deformations. Digital image equipment processes the information included in the speckle patterns and displays the consequent interferogram on a computer monitor. In this study, the experimental results of a canti-levered plate using ESPI were compared with those obtained from the simple beam theory. The ESPI results of the canti-levered plate, analyzed by 4-step phase shifting method, are close to the theoretical expectation. Similarly, out-of-plane displacements of a spot welded canti-levered plate were also measured by ESPI with 4-step phase shifting technique. The phase map of the spot welded canti-levered plate is quite different from that of the canti-levered plate without spot welding.