This study was aimed at analyzing a characteristics of the sewing machines and analyzing the effective sewing time in the garment manufacture process, therefore to obtain the basic data concerned with the sewing. operation standardization. The two methods were experimented. First, two garment factories established in Seoul and Geonggi province were randomly selected for the analyzing the sewing speed of the sewing operator for the optimized sewing speed using the equipment of Digital Tachometer HT4100. Second, five garment factories established in Seoul and Geonggi province were randomly selected to analyze the required time data to reach the fixed sewing speed using the lock stitch sewing machine which was used in the sewing factories. The results are divided into 3 categories as follows; 1) Survey results for the optimized sewing speed : The sewing operations of 10~20 cm range were most frequently selected in seam constructions in Korean sewing factories, and the sewing speed of 2,500 R.P.M was most used; 2) Required time to reach the fixed sewing speed using the lock stitch sewing machine : The mean of required time to the fixed sewing speed of 2.500 R.P.M was 3.5 second, and the mean of the real-sewing length during the 3.5 second was 43.8 cm ; 3) Analysis of the optimized sewing speed calculated using these results : The optimized sewing speed for the sewing manufacturers of the upward of 43.8 cm was 2,500 R.P.M. and for the sewing manufacturers of the below of 42.2 cm, the optimized sewing speed was 2.450 R.P.M.