- 연속식 반응기를 이용한 Conjugated Linoleic Acid 함유 재구성지질의 합성 연구
- ㆍ 저자명
- 박래균,이기택
- ㆍ 간행물명
- 한국식품영양과학회지
- ㆍ 권/호정보
- 2003년|32권 8호|pp.1200-1205 (6 pages)
- ㆍ 발행정보
- 한국식품영양과학회
- ㆍ 파일정보
- 정기간행물| PDF텍스트
- ㆍ 주제분야
- 기타
연속식 반응기에서 sn-1,3위치 특이성을 가지는 Rhizomucor miehei lipase(Lipozyme RM IM)를 사용하여 CLA를 함유한 재구성지질을 합성하였다. 옥수수유에 CLA를 transesterification 하기 위한 반응 조건은 연동 펌프의 유속, 반응온도 및 기질의 몰 비율이었다. 연동 펌프의 유속을 변수로 한 실험에서는 유속 1 mL/min, 반응온도 55$^{circ}C$ 및 1:3 기질몰 비율일 때 재구성지질 중 최대 CLA함량이 10.26 ㏖%을 보였으며, 반응온도를 변수로 한 반응에서는 반응온도가 $65^{circ}C$일 때 최대 CLA함량 17.33 ㏖%을 나타냈다. 또한 반응 기질의 몰 비율을 변수로 한 재구성지질 합성에서는 1:5몰 비율에서 최대 CLA 함량 17.50 ㏖%을 보였다. Pancreatic lipase analysis 통하여 재구성 지질의 sn-1,3과 sn-2 위치 지방산 조성을 분석하였고 재구성지질의 불포화도를 측정하기 위하여 요오드 값을 측정한 결과 유속 1 mL/min, 반응 온도 55$^{circ}C$, 몰 비율 1:5 조건에서 120의 실험 조건 내에서 가장 큰 요오드 값을 나타내었다. 한편 각각의 재구성지질 HPLC 분석 결과 99%의 TAG와 1% 이내의 DAG와 MAG가 분석되었다.
Structured lipids (SL) were synthesized by transesterification of corn oil and conjugated linoleic acid (CLA) in the continuous type reactor using sn-1,3 specific Rhizomucor miehei lipase. The parameters of reaction were observed in terms of flow rate, temperature, and substrate molar ratios. The highest incorporation of CLA was obtained with 1 mL/min flow rate, 55$^{circ}C$ and 1 : 3 (corn oil/CLA) molar ratio, showing 10.26 ㏖%. When different reaction temperatures and substrate ratios were studied, the highest incorporation was obtained at $65^{circ}C$ (17.33 ㏖%) and 1 : 5 (corn oil/CLA) ratio (17.50 ㏖%), respectively. After pancreatic lipase analysis, most of all CLA were found at sn-1,3 position. The iodine values of obtained SLs ranged from 110 to 120. From the neutral lipid analysis by normal-phase HPLC, produced SLs composed of 99.35 ∼ 99.89% triacylglycerols, 0.11 ∼ 0.51% 1,2- and 1,3-diacylglycerols, and 0.06 ∼ 0.22% monoacylglycerols.