Due to various types of errors added to dynamic weight measurement data, proper methods to reduce measurement errors are required to produce reliable weights. To cope with parasitic types of errors in real systems, information provided by the various sensors is utilized and combined in such a way to reduce the measurement errors of load cells. In addition to four channels of load cells from a trailer, an accelerometer is used to obtain the information to compensate the error induced from vertical movement of the vehicle due to the variation of ground level. A model trailer system is run to verify the effectiveness of the proposed method to reduce noise of dynamic weight measurements. Experiments show that the processed error magnitudes of less than 20 g can be obtained for 10 Kg experimental loads.