This study was conducted to examine the marking efficiency of a dress pattern in order to reduce textile loss by pattern marking. A basic one-piece dress pattern saved to the Yuka CAD System was graded with different sizes and arranged for industrial purpose to calculate the marking efficiency in different conditions. Condition of marking experiment is made it a rule to use 150cm textile width and apply 44, 55, 66 pattern size for three pieces of a dress patterns. The results of the study indicated that the marking efficiency rates of the dress pattern with a separate facing was higher than the one with a self facing. In the dress pattern with a separate facing, the separated seam at center back was appeared to have a higher marking efficiency than the extended seam. It was also found that the efficiency rate was higher in the pattern with a seam at center back when comparing with the dress pattern without a seam. When the marking with a horizontally-loaded collar was compared with a vertically-loaded collar, the efficiency rate was higher for the collar loaded horizontally, The result of the study showed that the type of facing, the location of a seam, and the direction of collar loading were the factors directly related to increasing marking efficiency. The dress patterns marked efficiently in terms of a type of facing, seam, and collar treatment can reduce fabric loss and also shorten the time needed for marking process.