Several tests were conducted to optimize design parameters of soil washing technique for arsenic contaminated tailings and soils. Arsenic contaminated tailings and soils have been sampled from the N nine, Kwangwondo and the K mine, Kyungsangbukdo, respectively. According to the result of sequential extraction procedure, total arsenic concentrations were 21,028 $pm$ 190, 443$pm$7, and 37$pm$3 mg/kg, for mine tailings, dry field, and river sedimentary soil, respectively. The subtotal of weakly bonded and easily releasable arsenic concentrations which were 2,284$pm$100 (10.9%), 151$pm$5 (34.0%), 15$pm$3 (39.5%)mg/kg for mine tailings, dry field, and river sedimentary soil, respectively. Kinetics of arsenic extraction using NaOH showed that arsenic was extracted more than 90% after 6 hours for all samples. The optimized concentration of NaOH were 200 mM for all samples while the optimized dilution ratio were different to have 1:10 (mine tailings) and 1:5 (dry field, river sedimentary soil), respectively. Results of sequential soil washing tests using NaOH showed that arsenic concentrations obtained by Korean Standard Test Procedure were decreased to meet the regulation for both river sedimentary soil and dry field while they were not decreased largely for mine tailings, even though NaOH had much higher efficiencies of arsenic extraction than other extractants.