This research surveys the differences of fabric mechanical properties according to the different looms and the fabric positions with relation to warp and weft weaving tensions on the Picanol and Omega looms respectively. For this purpose, the grey fabrics woven in the previous paper are processed in dyeing and finishing processes, and the processing shrinkages are measured on each processes such as dryer, scouring, pre-set, dyeing and final-set using the fabric density and width. The mechanical properties of the finished fabrics are measured and discussed with relation to the warp and weft weaving tensions of the two looms and the variations of the fabric mechanical properties according to the fabric positions are also discussed. In addition, the fabric thickness according to the fabric positions such as right, left selvedges and center of the fabrics is also measured and discussed with the characteristics of the Picanol and Omega looms.