The ITO thin films were prepared by the FTS(Facing Targets Sputtering) system. The ITO thin films are deposited by changing the input current and working gas pressure. Then, electric characteristics, transmittance and surface roughness of ITO thin films were measured by Hall effect measurement, UV-VIS spectrometer and AFM. As a result, the ITO thin film was fabricated with resistivity 6xl0$^{-4}$ Ωㆍcm, carrier mobility 52.11 $ extrm{cm}^2$/Vㆍsec, carrier concentration 1.72 x $10^{20}$ $cm^{-3}$ transmittance over 85 % of ITO film at working gas pressure 1 mTorr and input current 0.6 A.