- 플로팅 링 실의 누설 특성에 관한 실험적 연구
- ㆍ 저자명
- 안경민,이용복,김창호,하태웅
- ㆍ 간행물명
- 윤활학회지
- ㆍ 권/호정보
- 2004년|20권 4호|pp.183-189 (7 pages)
- ㆍ 발행정보
- 한국윤활학회
- ㆍ 파일정보
- 정기간행물| PDF텍스트
- ㆍ 주제분야
- 기타
The floating ring seal is used in an oxidizer and a fuel pump of the turbo pump unit in the liquid rocket engine to optimize a leakage without rubbing phenomenon. The damper floating ring seal, one of the floating ring seals, is with round hole pattern surfaces. It can reduce the leakage by increased friction factor that obtained from experimental data. In this paper, the leakage test about floating ring seal and damper floating ring seal was conducted. The test result showed the leakage performance of damper floating ring seal was better than the leakage performance of floating ring seal. With the leakage test the lock-up and rotation test about seal was conducted and that position is measured. The relatively large lock-up eccentric ratio was obtained from the test result of damping floating ring seal. The attitude angle of seal increases with increasing of shaft rotation.