Hollow flange-shaped parts rue widely used in transportation systems. For good quality products, in general, design of preforms and die shapes for a progressive forging process is an important issue. For the design of die shapes for the forging process of a hollow flange, computer simulations Were earned out using the rigid-plastic finite element method. Forging defects like folding were seen in the vicinity of die corners at the typical shape ratios of upper and lower dies Die shape ratios at which the forging defect could occur during the extrusion-forging process of the hollow flange were investigated. The results might be efficiently used for the proper design of perform shapes, die shapes, and forging processes.