사진측량법(Photogrammetry)는 서로 다른 촬영각을 가지는 다수의 2차원 이미지로부터 대상물의 정밀한 3차원 형상을 얻어내는 기법이다. 본 연구에서는 사진측량법을 활용하여 다목적 실용위성 2호 비행모델 하부 탑재체 플랫폼(Low Payload Platform)의 고해상도 카메라 접합면에 대한 편평도(Flatness) 측정 작업을 수행하였으며, 정밀하게 교정된 2개의 스케일바(Scale Bar)를 사용하여 절대적인 길이 값을 3차원 모델에 부과함과 동시에 측정정확도를 계산하여 내었다. 또한 측정된 편평도 결과는 고해상도 카메라 납품 업체에서 제시한 편평도 요구조건과 비교되었다.
Photogrammetry, as its name implies, is a 3-dimensional coordinate measuring technique that uses photographs as the fundamental medium for metrology. In the last few years the accuracy of photogrammetry has increased dramatically thanks to the rapid advance of digital camera manufacturing technique. This paper discusses photogrammetric measurement of the interface surface of MSC(Multi-Spectral Camera), which is a main payload of KOMPSAT-2. Total 24 paper targets on the objective surfaces and two scale bars calibrated with high accuracy were used for measurement, and multiple images were taken from 11 different camera angles by using a spacecraft rotation dolly. As a result of analysis, 3D coordinates of each targeted point were obtained and the flatness value based on the selected reference plane was calculated and compared with the pre-determined requirement. The technique acquired by this study is expected to be used for the 3D precise measurement of ultra-light weight and inflatable space structures such as a satellite antenna and a solar array.
