We have designed a new driving mechanism of the raschel machine for industrial fabrics using the eccentric earn. Domestic raschel machines for industrial fabrics have low productivity and high level of noise and vibration because it uses the pot earn in the main driving mechanism. The goal of this research is to reduce the noise and vibration, and to enhance the productivity of the domestic raschel machine. Three dimensional modeling of the parts was carried out by using MDT (mechanical desktop), and kinematic analysis has been implemented to design the new needle driving and the guide driving mechanisms using the Visual Nastran program. To estimate the safety of the principal parts of the mechanisms, finite element analysis (FEA) has been conducted by using Visual Nastran program. As the result of FEA, the newly designed needle driving and guide driving units is estimated safe under actual driving. Consequently, we have developed a virtual prototype of the needle driving and guide driving units of the raschel machine for industrial fabrics which increase the productivity remarkably and reduce the noise and vibration. Moreover, the results show that the needle dwells for $190^{circ}$ at the uppermost position, and the guide performs shogging operation for $160^{circ}$. This motion has the effect of enhancing the stability of loop formation during knitting operation by speeding up the shogging motion of the guide bar of the domestic raschel machine for industrial fabrics.