In this study, wool fabric specimens were pre-mordanted using Sn, Al, Cu, Cr, and Fe, and subsequently dyed using cochineal, maintaining the pH of the dye bath constant using pH buffer solutions of 4, 5, 6, 7, and 8. In the case of wool fabric specimen, regardless of the type of mordanting agents, peak dye-uptake amount was obtained at the acidic region, pH 4, and above pH 6, the dye-uptake amount decreased remarkably. Differing from the cotton fabric case, the dyed wool fabric specimen exhibited red shade even in the case of non-mordanting, at the region of pH values of 4 and 5. It is presumed that in the acidic dye bath the effect of cationic amine group present in the structure of wool fiber molecules took place. The amount of color difference, among the mordanting agents, due to the increase of pH value, was highest for the Fe mordanting case. It seems, therefore, that the Fe mordanting is affected most by the pH value.