After the development of the Firefly, flight tests have been performed to verify the performance and get the parameters for the mathematical model of the aircraft. The flight test data is used to get parameters for the mathematical model of the aircraft through the parameter identification process. An arbitrary control input is applied to the test flight which is a part of parameter identification process. A square wave has been used a control input which is called Doublet signal. The aspect of the signal is same length and magnitude in both (+) and (-) directions such as sine wave. The Doublet signal is composed of a dominant frequency and many high frequencies, so that it is appropriate signal to excite the motion of an aircraft. In this paper, the control input of the flight test data has been analyzed to check the efficiency of the control input using DFT(Discrete Fourier Transform). From the result of analysis, an alternative input was extracted.