Standard capacitors, as like as Hamon resistor standards, of series connection/parallel connection ratio $10{mu}F/1000{mu}F;and;100{mu}F/10000{mu}F$ were fabricated for calibration of impedance bridges or analyzers with measuring ranges up to 1 F. The calculated correction terms to the ratio of one measured value in series connection to the value in parallel connection were evaluated to be $1.92{ imes}10^{-7}$. These capacitors were designed to be used not only as 100:1 capacitance standards but also as single capacitors or decade capacitors with decade values at frequencies up to 1 kHz.