We checked the conditions and material properties after producing the lime finishing layers with a mortar mix of processed lime. In addition, we reproduced the lime finishing layers of the Koguryo Tomb Murals, colored the layers with a few different techniques and identified the characteristics for each painting technique. As a result of the experiment, we could infer the producing techniques as well as teaming the conditions and properties of the lime finishing layers of the Koguryo tomb murals, and examined the maintenance of the lime finishing layers. Of those samples produced under various conditions, the layers of slaked lime, which were obtained after being hydrated underground for a long time, showed quite a good condition. Thus the slaked lime mixes produced through particular hydration methods are judged to increase the maintenance of the lime finishing layers of the Koguryo Tomb Murals. Mostly, the paints of Koguryo Tomb Murals indicated that they have similar conditions with the samples produced with a secco method. In addition, Considering the compositional forms of the painting layers and the boundary layers which formed between the painting layers and the finishing layers, we can verify that, in some cases, the conditions of the painting layers of the Koguryo tomb murals are similar to those which were produced with a combination of fresco and secco.