This is the first time in the literature dealing with the dynamic modeling and control of a rotating padder roller system. It is intended to design a control system with effective scheme and robustness to stabilize all vibration modes of a rotating padder roller system by using one set of sensor and actuator. The controller design depends on the specific pole-zero patterns. In practice, the pole-zero patterns remain the same, no matter how the physical system parameters are different. By properly placing the actuator and sensor, a realizable controller and sensor is designed to stabilize all the vibration modes and make the closed loop system absolutely stable. This will suppress the vibration without suffering from spillover and can eliminate an infinite number of vibration modes. The performance of this controller has been successfully implemented by computer simulation.