Clothe drape depends, on the one hand, on the mechanical and constructional properties of the textile materials and, on the other hand, on the form - construction of the cloth, and their connected positions at the seams. This article analyses the influence of seam types and directions on fabric drape. The drape coefficient together with the number and distribution of folds were determined using a Cusick Drape meter with a video camera and Drape Analyser. The results of our investigation showed that the number of folds on the samples with seams was greater, or in some cases, equal to samples without seams. The distribution and form of the folds also changed. Drape coefficient was, in most cases, greater on samples with seams than samples without seams. Furthermore it was discovered that by measurement repetition the angle values are similar even when the folds on the samples are not distributed in the same manner.