기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
고도산화와 정밀여과의 혼성공법을 이용한 유기화학물질의 분해 및 제거분석에 관한 연구 - 먹는 물을 중심으로 -
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 고도산화와 정밀여과의 혼성공법을 이용한 유기화학물질의 분해 및 제거분석에 관한 연구 - 먹는 물을 중심으로 -
저자명
안태영,전상호,안태석,한미애,허장현,박미영,An. Tai-Young,Jun. Sang-Ho,Ahn. Tae-Seok,Han. Mi-Ae,Hur. Jang-Hyun,Pak. Mi-Young
간행물명
멤브레인
권/호정보
2007년|17권 2호|pp.99-111 (13 pages)
발행정보
한국막학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

먹는 물 내에 존재하는 발암원인으로 의심되는 유기화학물질을 재래식 정수처리방법으로 제거한다는 것은 불가능하다. 이들을 AOP산화 & M/F membrane 혼성공정법을 이용하여 목적하는 처리수로 처리하고자 지하수를 반응조에 유효용량으로 유입하고 유기화학물질을 인위적으로 투입 혼합하여 충분히 희석시키고 이것을 효율적으로 처리하기 위해 최적운전조건을 도출하였다. 유기 화학물질 중 VOCs는 페놀과 톨루엔을 그리고 농약은 파라치온, 다이아지논과 카바닐을 대상으로 조사하였다. 실험은 각각 분류별 단일용액과 혼합용액으로 수행하였으며, 실험결과 충분한 분해 및 제거를 위한 운전조건은 $H_2O_2$는 150 mL로 정량 주입하고, pH는 $5.5{sim}6.0$, 온도는 $12{sim}16^{circ}C$로 일정하게 유지하고, 용존오존량은 5.0 mg/L이상, 반응시간은 $30{sim}40$분이 최적 조건이었으며 그리고 같은 반응기 내 분리막의 사용은 $0.45{mu}m$ 공경크기의 M/F membrane을 이용하여 대량의 음용수를 얻기 위한 결정이었다.

기타언어초록

It is impossible to remove toxic organic substances that are recognized as a cancer caused suspicious element in drinking water using the conventional water purification method. This study introduces groundwater into a reaction chamber as an effective amount of water to process this water using a mixed method of AOP oxidation and M/F membrane and purifies it as a desirable level by artificially mixing such toxic substances in order to effectively process the water. Based on this fact, this study configures an optimal operation condition. The VOCs existed in toxic substances was investigated as a term of phenol and toluene, and agricultural chemicals were also investigated as a term of parathion, diazinon and carbaryl. The experiment applied in this study was performed using a single and composite soolution. In the operation condition applied to fully dissolve and remove such substances, the amount of $H_2O_2$ injected in the process was 150 mL of a fixed quantity, the value of pH was configured as $5.5{sim}6.0$, the temperature was controlled as a range of $12{sim}16^{circ}C$, the dissolved amount of ozone was applied more than 5.0 mg/L, the reaction time was determined as an optimal condition, such as $30{sim}40$ minutes, and the segregation membrane in the same reactor was determined for acquire water drinking of large quantity using a pore size of $0.45{mu}m$ M/F membrane.