With environmental concerns over emitted particulate matters(PM) from combustion systems, various researches have been conducted on reduction and measurement techniques of particulate matters. The LII analysis results from numerical models and experiments in an ethylene/air laminar diffusion flame at elevated pressure up to 2.0 MPa with laser fluence $0.07;J/cm^2$, detection wavelength 400 nm were compared to validate a modified LII numerical model. The lifetime of the LII signal decreased as the elevated pressure increased, so that LII decay time also decreased in both results. In the aspect of heat transfer mechanism, it becomes earlier that dominant conduction starts. This shows that the results matched well under the pressure conditions. It is concluded that the LII numerical model could be applied to decide particle size in TIRE-LII at the high-pressure condition.