The hydraulic model test for the L-type Groynes with "ㄱ" shape were conducted to analyze flow characteristics around these groynes. The results of model tests should be used for the fundamental information to design the L-type Groyne constructed in the field. Main hydraulic factors such as the velocity and thalweg line changes in main channel and separation area were analyzed in this study. The thalweg line is stream line where the maximum velocity occurs, and the separation area is a boundary of main flow and recirculation zone. Model tests with 5 different arm-lengths of the L-type Groynes were conducted changing the velocity. The LSPIV(Large Scale Particle Image Velocimetry) technique was used to measure and analyze the flow variation around the L-type Groynes. The velocity in main channel was increased 1.5 times and there was no effects of different groyne arm-length on the velocity changes. The width of thalweg lines $(T_{CL})$ was changed to $55{sim}58%$ of chanel width, and the Froude number did not affect on the thalweg line $(T_{CL})$ and separation line $(S_h)$ changes.