Austenitic stainless steels (hereafter A-STS) such as STS304 and STS316 are paramagnetic metals. However, a small amount of partial magnetization is generated in A-STS because of the imperfect final heat treatment and mechanical processing. Surface cracks on paramagnetic metal with a partially magnetized region (hereafter PMR) are difficult to inspect. In this paper, we propose a method for high speed inspection and evaluation of a crack on A-STS. Cracks can be inspected with high speed by using 64 arrayed Hall sensors (HSA) with 3.5 mm spatial resolution and a sheet type induced current (STIC). Then, a crack can be evaluated quantitatively by using the detailed distribution of the magnetic field obtained by using single Hall sensor scanning (SSS) around the inspected crack area. Several cracks on A-STS with partially magnetized areas were examined and the experimental formulas were derived.