Increasing demand for timber and the depletion of natural forest have encouraged utilization of many non-popular species. The understanding of wood properties and behavior is important to evaluate the potential of these species to produce high quality end products. This study determines the anatomical and physical properties of Hevea species viz Hevea pauciflora, Hevea guianensis, Hevea spruceana, Hevea benthamiana and Hevea brasiliensis. Each sample tree was cut into three different portions along the height (bottom- B, middle- M and upper -T parts) and two radial samples (outer- O and inner- I parts). H. brasiliensis clone RRIM 912 exhibited the longest fibre with $1214{mu}m$, followed by H. benthamiana (HB, $1200{mu}m$), H. pauciflora (HP, $1189{mu}m$), H. spruceana (HS, $1158{mu}m$) and H. guianensis (HG, $1145{mu}m$). Fibre length has a positive correlation with specific gravity. The largest fibre diameter ($24.9{mu}m$) and lumen diameter ($12.5{mu}m$) were recorded in H. guianensis. The highest moisture content was obtained from H. spruceana (64.34%) compared to the lowest with 60.01% (Clone RRIM912). The higher moisture content is normally associated with lower strength. Overall, the properties of clone RRIM 912 is found to be comparatively better because of higher strength due to longer fibre length, thicker cell walls and higher specific gravity than the other Hevea species. Therefore, this species can be used as a general utility timber.