As the modern society has become highly industrialized and functionalized, the entry of women in public affairs has become brisk and extensive, and the studies of jackets which can satisfy the functions and designs for various activities have become important. Especially in the tailored collar which is the typical collar for female jackets, the studies such as scientific original form design, and design evaluation through analyzing functionality and sensitivity and others must be systematically carried out. In this study, therefore, the objective was placed in examining the actual state of the production of the tailored collar in the field of production first, and inquiring the general theories on the constituent elements of tailored-collar and production methods by analyzing it and comparing it with the educational tailored-collar production methods. First, in regard to the relation between the collar and the length of the backside neck of the bodice, in most cases, they were employing the method to enlarge the length of the backside neck of the bodice by shortening the length of the neck-base girth. That is, they were processing in order that the self collar band inside of the roll line and the fall of the collar can make a soft curved line. Second, when producing tailored-collar patterns, it is desirable to very the inclination according to the breath of the collar or thickness of the fabric because the stability of the inclination of the collar differs depending on the condition the collar is set, the girth of the collar edge. the broader the breath of the collar becomes, the thicker the fabric becomes, and the more the cloth is against the cold, it is necessary to make the inclination larger. Third, in the size relation between the upper collar and under collar, when sewing collars, it becomes thick and stabilized as it goes from the part in which extra pieces were put to the part in which extra pieces are not put. So you must make the upper collar larger by putting in extra pieces. The amount to be put in differs depending on characteristics of the materials.