기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
배출봉을 이용한 정밀여과용 관형 모듈의 투과특성
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 배출봉을 이용한 정밀여과용 관형 모듈의 투과특성
저자명
정건용,최정규,Chung. Kun-Yong,Choi. Jeong-Gyu
간행물명
멤브레인
권/호정보
2009년|19권 4호|pp.285-290 (6 pages)
발행정보
한국막학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

공칭 세공크기 $0.1;{mu}m$이고 내경이 5 mm인 정밀여과용 관형 분리막 내에 자체 설계한 배출봉을 삽입하여 막오염 감소효과에 따른 투과유속을 측정하였다. 원료용액으로는 에멀젼 상태의 dioctyl tinoxide (DOTO) 입자를 사용하였으며 0.5 wt%까지 농도를 변화시키면서 1.6 bar 이내에서 운전하였다. 배출봉의 효과는 매 실험마다 배출봉을 삽입한 경우와 사용하지 않은 경우의 투과유속을 비교하여 평가하였다. 배출봉을 사용할 경우 운전압력 1.6 bar에서 최대 20%의 투과유속이 향상되었다. 또한 DOTO 농도가 증가함에 따라서 배출봉에 의한 투과유속 향상효과는 크게 나타났으며 0.5 wt% 농도에서 43%까지 투과유속이 향상되었다.

기타언어초록

The permeation experiments were carried out for the nominal pore size $0.1;{mu}m$ and 5 mm inner diameter microfiltration tubular membrane equipped with self-designed discharging rod in order to determine the effect of fouling reduction. Dioctyl tinoxide (DOTO) latex particle was used to prepare up to 0.5 wt% concentration of feed solution, and the experiments were operated within 1.6 bar. The permeation flux effect on the discharged rod was measured as a result of flux comparison between the cases of equipped and non-equipped discharge rod modules for every experiment. The permeation flux for the case using the discharged rod was enhanced to 20% at 1.6 bar operating pressure. The improvement on permeation flux for using the discharged rod was greater as the concentration of feed increased, and reached up to 43% under 0.5 wt% concentration of feed solution.