This study was conducted to characterize the relationship of rainfall intensity and slope stability by using numerical analysis. The maximum precipitation rate for 10 minutes, 1 hour and 1 day was determined as 28 mm, 70 mm and 271 mm, respectively, by investigating 36 years of KMA data. Then slope infiltration analysis was performed to obtain the ground water level in the slope by using computer programming SEEP/W, and slope stability analysis was done for each time step by using program SLOPE/W. The factor of safety was minimized when the slope was saturated under each rainfall intensity; the time required for saturation was 2 hours with 10 minutes rainfall intensity of 28 mm, 7 hours with 1 hour rainfall intensity of 70 mm and 3 days with 1 day rainfall intensity of 271 mm. When accumulated rainfall was 196 mm for the 10minutes rainfall intensity of 28 mm with duration of 2 hours, the factor of safety was decreased to 1.0, while accumulated rainfall of 468 mm and 820 mm for the 1 hour and 1 day rainfall intensity, respectively, was required to reach the factor of safety, 1.0. Since the normalized rainfall intensity was 13 mm and 1.9 mm for 1 hour and 1 day maximum rainfall, respectively, those results showed that the rainfall intensity could have a more effect on the slope stability than the accumulated rainfall.