For a Product Oil Carrier, longitudinal bulkhead as well as transverse one is corrugated shape in general and intersection part of bulkheads is utilized for a pipe trunk. Since lower and upper stools are to be connected with all of longitudinal and transverse bulkheads, they have a uniform height respectively. The purpose of this study is the development of design system for the minimization of total weight of longitudinal and transverse bulkheads at the initial design stage. In this study, the beam element models for longitudinal and transverse corrugated bulkheads are established and they are applied to the structural analysis. For the practical design, the selection and the position of an additional pipe trunk are considered in this study. In addition the required minimum distance between the bracket installed along the web of corrugation at lower stool and the diaphragm is taken into consideration during optimization process. Evolution strategy(ES) is adopted as an optimization technique.