During the preliminary design phase of a supersonic aircraft, it is necessary to evaluate many potential engine/airframe combinations to determine the best solution to given set of mission requirements. And it is very important to establish a methodology to predict precisely afterbody drag so that accurate engine installed performance can be estimated. It was carried out in this paper to establish a methodology to predict afterbody drag of F-15K supersonic aircraft based on IMS(Integral Mean Slope) methodology, acquire afterbody drag data and compare its calculated data with the test data acquired from the wind tunnel test data based on 4.7% model scale. The comparison results showed good agreement between the calculated data and test data and it was found that the methodology described here to predict and test afterbody drag is acceptable.