기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
마하-젠더 광 변조기와 EDFA를 사용한 아날로그 광통신 링크의 랜덤 지터 특성
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 마하-젠더 광 변조기와 EDFA를 사용한 아날로그 광통신 링크의 랜덤 지터 특성
저자명
윤영민,이민영,신종덕,김부균,Yoon. Young-Min,Lee. Min-Young,Shin. Jong-Dug,Kim. Boo-Gyoun
간행물명
전기전자학회논문지
권/호정보
2009년|13권 4호|pp.96-102 (7 pages)
발행정보
한국전기전자학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

마하-젠더 광 변조기(Mach-Zehnder modulator; MZM)와 EDFA(erbium-doped fiber amplifier)를 사용한 아날로그 광통신 링크의 랜덤 지터 (Random Jitter; RJ) 특성에 관하여 연구하였다. RF 주파수 분석기의 잡음 스펙트럼 데이터를 이용한 지터 측정법과 샘플링 오실로스코프의 히스토그램 데이터를 이용한 지터 측정법의 두 가지 방법으로 RJ를 구하였다. MZM에 인가되는 광 파워나 RF 파워가 증가하면 출력 신호 파워가 증가하여 RJ가 감소하였다. EDFA가 삽입되지 않은 링크에서 잡음 스펙트럼으로 측정한 최소 RJ는 RF 파워 10 dBm, 광 파워 8 dBm인 경우에 약 1 ps으로 나타났다. EDFA를 삽입한 링크에서는 EDFA 이득이 증가하면 RJ가 지속적으로 감소하여 지터 바닥에 수렴하였다. 이 보다 이득이 증가하면 다시 RJ가 증가하는 것을 관찰하였다. EDFA의 이득이 동일하면, 입력 광 파워가 클 때 RJ의 크기가 보다 작았고, 또한 입력 광 파워가 작은 경우에는 EDFA 이득이 증가함에 따라 RJ의 감소율이 보다 크게 나타났다.

기타언어초록

We investigate the characteristics of RJ (random jitter) in an analog fiber-optic link employing a MZM (Mach-Zehnder modulator) and an EDFA (Erbium-doped fiber amplifier). RJ has been measured using two methods, one of which derived from the noise spectrum of a RF spectrum analyzer and the other from the histogram data of a sampling oscilloscope. If the optical power and/or the RF power input to the MZM increase, RJ decreases due to the output signal power increase. For the optical link without EDFA, the minimum RJ is about 1 ps at an RF power of 10 dBm and an optical power of 8 dBm measured using the noise spectrum method. For the optical link with an EDFA, RJ decreases toward a jitter floor as the EDFA gain increases. If the gain increases further, it has been observed that RJ increases from the minimum. If the EDFA gain is fixed, RJ is smaller for the case of larger optical input power. As the EDFA gain increases, RJ reduction rate becomes greater for the case of lower optical input power.