기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
임플란트의 직경과 길이 변화가 초기 안정성에 미치는 영향
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 임플란트의 직경과 길이 변화가 초기 안정성에 미치는 영향
  • Influence of implant diameter and length changes on initial stability
저자명
조재명,조욱,윤미정,정창모,전영찬,Cho. Jae-Myoung,Cho. Uk,Yun. Mi-Jung,Jeong. Chang-Mo,Jeon. Young-Chan
간행물명
대한치과보철학회지
권/호정보
2009년|47권 3호|pp.335-341 (7 pages)
발행정보
대한치과보철학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

연구목적: 충분한 골질과 골량은 임플란트의 조기 실패 방지와 초기 안정성을 위해서 중요한 사항으로 알려져 있다. 임플란트 길이나 직경이 초기 안정성에 미치는 영향을 연구한 다수의 실험들이 골과의 접촉면적을 달리하였기 때문에 직경과 길이만이 초기 안정성에 미치는 실제 영향을 파악하는데 한계가 있다. 이에 유사한 표면적을 가지는 임플란트를 통하여 길이와 직경 상대적 변화가 초기 안정성에 미치는 영향을 알아보고자 하였다. 연구 재료 및 방법: 골질에 따라 피질골과 해면골의 두께가 다른 4종류의 폴리우레탄 모형골을 임플란트 식립에 사용하였다. 유사한 표면적과 형태를 가지나 직경과 길이가 서로 다른 임플란트 ($3.5{ imes}13.0;mm$, $4.0{ imes}11.5;mm$, $4.5{ imes}10.0;mm$, $5.0{ imes}8.5;mm$) 10개를 식립하고 식립 회전력과 공진 주파수를 측정하였다. 결과 및 결론: 초기 안정성에 영향을 미치는 주 요소는 골질이었으며 (P < .05), 식립 회전력과 공진 주파수 모두 골질이 우수할수록 높은 측정치를 보였다. 2. D1, D2, D3 모형골에서 임플란트의 직경이 커지고 길이가 짧아짐에 따라 공진 주파수는 유의한 차이를 보이지 않았으나 (P >.05), 식립 회전력은 증가하였다 (P <.05). 3. D4 모형골에서는 임플란트의 직경이 커지고 길이가 짧아짐에 따라 공진주파수와 식립 회전력 모두 감소하였다 (P <.05). 이상의 결과로부터 골질이 양호한 조건에서는 길이가 짧더라도 직경이 큰 임플란트의 사용이 초기 안정성 측면에서 부가적 수술의 대안이 될 수 있을 것으로 생각된다.

기타언어초록

Statements of problem: Adequate bone quality and quantity were important to achieve initial stability and to prevent early failures. However there were few published data available regarding the actual effect of dimensional change in implant geometry on initial stability. Purpose: The purpose of the current study was to investigate the influence of diameter and length changes on initial stability of implants. Material and methods: Four types of dummy bone (D1, D2, D3 and D4) consisted of cortical and cancellous layers with different thickness were simulated. Implants which had similar surface area to each other ($3.5{ imes}13.0-mm$, $4.0{ imes}11.5-mm$, $4.5{ imes}10.0-mm$, $5.0{ imes}8.5-mm$) were inserted in dummy bones. Implant stability as a function of peak insertion torque and resonance frequency values were recorded for each implant. Results: 1. Bone quality was a major influential factor to achieve initial stability (P <.05). 2. In D1, D2 and D3 dummy bones, implant stability quotient values were not significantly different to each other (P >.05), however insertion torques were increased with wider and shorter implants (P <.05). 3. In D4 dummy bone, implant stability quotient values and insertion torques were decreased with wider and shorter implants (P <.05). Conclusion: From a point of view of initial stability, it is suggested that use of wide and short implant may be helpful in avoiding bone augmentation procedures in area of adequate bone quality.