The purpose of this study is to examine a proper amount of addition and a proper point for addition of titanium dioxide for the manufacture of E0 type of urea-formaldehyde resin (UF). The reduction of free formaldehyde from UF resin treated particle board was also investigated. $TiO_2$ content was 0.5%, 1% and 3% on the dry basis of UF resin. UV light was used to initiate reaction. The results of this study are as follows: 1. During UF resin manufacturing process, the second adding step of urea was proper point for $TiO_2$ addition. 2. 1 % addition of $TiO_2$ gave good values for the Eo type urea-formaldehyde resin. 3. There was no significant difference between physical properties of particle board, but the higher the adding content of titanium dioxide resulted in the lower the mechanical properties.