This paper presents a 10Gbps CMOS parallel-to-serial converter for transmission of sensor data. A low-noise clock multiplying unit(CMU) and a multiplexer with controllable data sequence are proposed. The transmitter was fabricated in 0.13 um CMOS process and the measured total output jitter was less than 0.1 UIpp(unit-interval, peak-to-peak) over 20 kHz to 80 MHz bandwidth. The jitter of the CMU output only was measured as 0.2 ps,rms. The transmitter dissipates less than 200 mW from 1.5 V/2.5 V power supplies.