Possibility of the usage of sludge generated in coal mine drainage treatments as a briquette additive was investigated by the combination of industrial, elemental, and combustion experiments. A series of briquettes having 2% and 6% of sludge were used for the experiments. Compared to the control sample, our results show that all experimental values for the briquettes are very similar. In particular, it is worthy to note that there is no obvious difference in calorific values for the briquettes containing 2% or 6% of sludge. The calorific values are 4,250~4,360 kcal/kg, 4,240~4,250 kcal/kg, 4,180~4,210 kcal/kg, and 4,270~4,360 kcal/kg for the control sample, briquette containing 6% of Hambaek sludge, briquette containing 6% of Hamtae sludge, and briquette containing 2% of Hambaek sludge, respectively. Results of ash fusion temperature show that the temperature is greater than $1,550^{circ}C$ for the control sample. However, the temperature for the briquettes with 6% of Hambaek sludge and 2% of Hambaek or Hamtae sludge is $1,510^{circ}C$. For a briquette containing 6% of Hamtae sludge, the temperature of ash fusion is $1,530^{circ}C$. After combustion, environmental impacts of the briquettes with sludge were tested. Little environmental influence was observed for the combusted briquettes with sludge.