In order to improve the interfacial adhesion property between Poly(p-phenylene benzobisoxazole) (PBO) fiber and epoxy, the surface modification effects of PBO fiber under dielectric barrier discharge treatments in different time were investigated. The samples were tested for surface morphology, functional groups, surface wettability and interfacial shear strengths (IFSS) in epoxy using scanning electron microscope, Fourier transform infrared spectroscopy, water contact angle measurements and Micro-bond pull out tests, respectively. The results indicated that fiber surface morphology after plasma treatment was rougher than untreated one. Some polar groups were introduced on fiber surface in plasma treatment. Moreover, surface wettability and the IFSS between fiber and epoxy had much improvement after plasma treatment, the contact angle decreased with the treatment time increasing and reached the lowest value when the treated time was 60 s, and the IFSS was improved by 117.3 %. On the other hand, no significant difference in single fiber tensile test was observed between treated and untreated fibers when the processing time was shorter than 75 s, but the tensile strength declined by more than 10 % after 75 s treatment as a result of the excessive plasma etching.