본 연구에서는 수직 가열로(vertical furnace)를 이용하여 $1150^{circ}C$의 온도에서 섬유형태의 고순도 단일벽 탄소나노튜브(singlewalled carbon nanotubes)를 합성하였다. 탄소나노튜브의 구조에 영향을 미치는 실험 변수인 페로센(ferrocene)의 농도, 혼합용액의 주입 속도, 싸이오펜(thiophene)의 농도, 수소($H_2$)의 주입 양을 조절하여 고순도의 단일벽 탄소나노튜브 섬유의 최적화 된 대량 합성 조건을 확립하였다. 또한 각 요인들이 탄소나노튜브의 생성에 미치는 영향에 대해 논의하였다. 분석 결과, 최적화 된 조건에서 1.16~1.64 nm의 직경을 가진 고순도의 단일벽 탄소나노튜브가 다발(bundle) 구조로 정렬되어 있음을 확인할 수 있었다.
Many routes have been developed for the synthesis of signle-walled carbon nanotubes (SWCNTs). We spun fibers of SWCNTs directly from vertical furnace using a liquid source of carbon and an iron-contained molecule. The solution was prepared by ethanol as a carbon source, in which ferrocene as a catalyst, thiophene were dissolved. It was then injected from the top of the furnace into hot zone with hydrogen as a carrier gas. We successfully synthesized high-quality SWCNTs by adjusting the various experimental conditions, such as concentration of ferrocene, solution injection rate, concentration of thiophene, and hydrogen flow rate. Measurement of Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy were carried out to find the optimized conditions. The synthesized SWCNTs (1.16~1.64 nm) appeared a bundle structure and well-aligned parallel to the direction of furnace. These results also provide an simple way for high-quality SWCNTs mass production and fabricating direct spining SWCNTs fiber. It will allow one-step production of SWCNTs fiber with potentially excellent properties and wide-range applications.
