기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
인회석 및 석회석을 이용한 고로폐광산 ARD 내의 비소 저감효율 연구
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 인회석 및 석회석을 이용한 고로폐광산 ARD 내의 비소 저감효율 연구
저자명
박명호,이영우,허연강,박해철,사성오,최정찬,Park. Myung-Ho,Lee. Young-Woo,Hur. Yon-Kang,Park. Hae-Cheol,Sa. Sung-Oh,Choi. Jung-Chan
간행물명
지질공학
권/호정보
2011년|21권 3호|pp.231-237 (7 pages)
발행정보
대한지질공학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

현재 고로폐광산에서 가동 중인 인회석 배수체계의 설계는 다음과 같다 ; 인회석 배수시스템은 침사조, 반응조 및 침전조로 구성되며 폐갱도 및 광미장의 침출수를 배관을 통하여 집수한 후 인회석 배수시스템으로 수리구배에 의해 운반되게 설계되었다. 2004년도에 실시된 실내실험 결과에 의하면, 인회석 38.8 톤을 매년 반응조에 새로 충진시켜 줘야 하며 침전물은 매 3개월 마다 침전조에서 제거해줘야 한다. 본 연구의 목적은 석회석 및 인회석을 이용한 실내실험을 실시하여 ARD 내의 비소저감 효율성을 평가하고 침출수 처리 체계 내에 사용되는 침전제를 재평가하는 것이다. 실내실험 결과, 석회석 및 인회석의 비소 저감율은 64.7-98.3%이며 인회석의 경우 비소 저감율은 입도에 반비례하였다. 비소화합물은 비산염인회석 그리고 칼슘비산염수화물의 형태인 것으로 추측된다. 따라서, 인회석 및 인이 포함된 석회석은 저 농도의 비소제거를 위한 침전제로 사용될 수 있는 것으로 판단된다.

기타언어초록

An active apatite drainage system has been developed at the Goro abandoned mine, comprising a grit cell, a reaction cell, and a precipitation pond. Leachate from an abandoned adit and tailing ponds is collected in a pipeline and is transported to the apatite drainage system under the influence of the hydraulic gradient. The results of a laboratory experiment performed in 2004 indicate that the reaction cell requires 38.8 ton/year of apatite and that precipitate will have to be removed from the precipitation pond every 3 months. The purpose of this study is to evaluate a laboratory test on the efficiency of limestone and apatite in removing arsenic from ARD (acid rock drainage), and to evaluate the suitability of materials for use as a precipitant for the leachate treatment disposal system. The laboratory tests show that the arsenic removal ratios of limestone and apatite are 67.4%-98.3%, and the arsenic removal ratio of apatite is inversely proportional to its grain size. The arsenic compounds are assumed to be Johnbaumnite and Ca-arsenic hydrate. Therefore, apatite and phosphorous limestone can be used as a precipitant for the removal of arsenic, although it is difficult to remove arsenic from ARD when it occurs in low concentrations.