Isophorone diisocyanate(IPDI), polytetramethylene glycol 1000 (PTMG1000), and N-methyl diethanol amine (MDEA) were applied to prepare cationic polyurethane water dispersions (PUD). Various neutralizers and chain extenders were introduced in order to investigate property changes, such as particle size, viscosity, $T_g$, tensile strength, and water swellability, depending on chemical structure of those chemicals. While the PUDs neutralized by acetic acid showed a typical elastomeric behavior, the others used with hydrochloride presented crystalline behavior. Among chain extenders isophorone diamine (IPDA) provided the best mechanical property. The particle size of the PUD neutralized with HCl was smaller than that with acetic acid. It is believed that this is attributed to the size difference of counter ions. The PUD chain-extended with hydrazine had the smallest particle size.