기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
사이클로헥산의 화재 및 폭발 특성치의 측정 및 고찰
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 사이클로헥산의 화재 및 폭발 특성치의 측정 및 고찰
저자명
하동명,Ha. Dong-Myeong
간행물명
한국가스학회지
권/호정보
2011년|15권 2호|pp.75-81 (7 pages)
발행정보
한국가스학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

사이클로헥산의 안전한 취급을 위해서 $25^{circ}C$에서 폭발한계와 폭발한계 온도의존성 그리고 하부인화점을 고찰하였다. 또한 발화지연시간에 의한 발화온도를 측정하였다. 공정의 안전을 위해서 노말헵탄의 폭발하한계는 1.0 Vol%, 상한계는 9.0 Vol%를 추천하였고, 하부인화점은 $-20^{circ}C$를 추천하였다. ASTM E659-78 장치를 사용하여 발화온도와 발화지연시간을 측정하였고, 여기서 측정된 최소자연발화온도는 $255^{circ}C$였다. 그리고 노말헵탄의 새로운 폭발한계 온도의존식을 제시하였으며, 제시된 식은 문헌값과 일치하였다.

기타언어초록

For the safe handling of cyclohexane, the explosion limit at $25^{circ}C$ and the temperature dependence of the explosion limits were investigated. Flash point and AIT(autoignition temperature) for cyclohexane were experimented. By using the literatures data, the lower and upper explosion limits of cyclohexane recommended 1.0 Vol% and 9.0 Vol%, respectively. Moreover lower flash points of cyclohexane recommended $-20^{circ}C$. It was measured relationship between the AITs and the ignition delay times by using ASTM E659-78 apparatus for cyclohexane, and the experimental AIT was $255^{circ}C$. The new equations for predicting the temperature dependence of the explosion limits of cyclohexane is proposed. The values calculated by the proposed equations were a good agreement with the literature data.