이산화탄소 방출을 줄이기 위해 포트랜드 시멘트 성분 일부를 시멘트 보충재를 혼합해준 시멘트의 제조에 대해 연구하였다. 이산화탄소를 0.18 kg $CO_2$/kg 정도 줄이기 위해 포트랜드 시멘트에 보충재를 20 wt% 정도 혼합하였다. 이 혼합시멘트의 압축 강도는 포트랜드 시멘트 ASTM C-150의 표준치를 초과하며, 28일간의 굳는 과정중에 37 MPa의 압축 강도를 가졌다. 혼합시멘트의 미세구조는 포트랜드 시멘트와 유사하였다.
This paper reports the use of supplementary cementing materials (SCMs) derived from local resources, for the partial replacement of Portland cement to reduce $CO_2$ emission during cement production. Replacement of Portland clinkers up to 20 wt.% with SCMs in normal cements reduced $CO_2$ emission by 0.18 kg $CO_2$/kg. The compressive strength exceeded the standard specification for Portland cement ASTM C-150. Blended cement samples containing 20% Portland clinker replacement had compressive strengths of 37 MPa after 28 days of curing time. The microstructure evolution of blended cement at a composition of 80:20 was similar to that of the 100% Portland cement, where the structure between days 28 and 56 reached a steady state. Blended cements with compositions of 70:30 and 60:40 still showed progress of CSH plate formation and the lack of massive structure development. It is shown that the use of supplementary cementing materials could be as one of alternative ways to reduce $CO_2$ emissions during cement production.
