Textiles, especially those made of natural fibers, are suitable medium for the growth of microorganisms which causes disease transmission, stink, colorful spots, and reduction in fabric strength. This research focuses on the antimicrobial finishing of cotton fabrics using colloidal solution of silver nanoparticles. Due to the difficulties of adding a new step to the finishing process of cotton textiles, efforts have been made to combine the antimicrobial treatment with the conventional finishing processes. For this purpose two chemical finishes of Fixapret ECO as a crosslinking agent and Cellofix ME as a resin former have been used in anti crease finishing of cotton fabric and their effects were evaluated. The properties of the samples have been investigated by measuring the resistant of samples against bacteria, crease recovery angle, abrasion, and washing fastness. The results showed that treated samples by pad-dry method have the best antibacterial effect with a direct relation between the increase in drying temperature and antibacterial properties. However, the washing and abrasion fastness were not at the acceptable level. Co-application of the colloidal solution of silver nanoparticles with the crease resistant materials improved both fastness properties while at the same time limited the direct contact between the nanoparticles and the bacteria so the antibacterial efficiency was reduced. Subsequently, it was concluded that the antibacterial finishing method should be selected according to the end uses. In addition, antibacterial treatment could be one of the multi-purpose finishes for cotton fabric.