Carbon monoxide (CO) is a primary air pollutant as an indicator of air quality released from motor vehicle combustion. A comparative study of the distributions of CO concentration with no heat source in two tunnel models open and closed at both end sides is simulated with a commercial CFD code. The tunnel models are used to investigate the CO concentration distributions at three Reynolds numbers, which are computed by the inlet velocities of 0.3, 0.6 and 1.0 m/s. For a better tunnel design, the CFD predictive approaches are available in qualitatively studying the distributions of CO concentration. In the case of the tunnel open at both end sides in sixty seconds, the total CO concentrations are approximately twenty eight percent higher than those in the closed case.