- 주요 국산 침엽수 통원주 부재의 송풍오-븐건조 특성 - 제1보: 국산 낙엽송 통원주 부재를 중심으로 -
- ㆍ 저자명
- 이남호,신익현,이창진,Lee. Nam-Ho,Shin. Ik-Hyun,Lee. Chang-Jin
- ㆍ 간행물명
- 목재공학
- ㆍ 권/호정보
- 2012년|40권 1호|pp.44-52 (9 pages)
- ㆍ 발행정보
- 한국목재공학회
- ㆍ 파일정보
- 정기간행물| PDF텍스트
- ㆍ 주제분야
- 기타
낙엽송 원통형 원주목에 대하여 수증기댐처리와 코팅처리를 실시하여 오-븐건조 하면서 건조속도, 재내의 수증기압 및 재온분포 및 건조할렬 등을 조사한 결과는 다음과 같다. 생재에서 난방된 실내의 이용함수율 수준인 함수율 약 8%까지 건조하는데 72~144시간 소요되었다. 무처리재와 코팅처리재는 전 건조기간에 걸쳐 통공층의 온도가 통피층의 온도보다 항상 높은 분포모형을 보인 반면, 수증기댐처리재의 경우 통피층의 온도가 통공층보다 높거나 같은 분포를 보였다. 수증기댐처리재와 코팅처리재의 경우는 거의 전 건조기간에 걸쳐 통피층의 수증기압이 통공층 보다 큰 분포를 보였다. 총체적으로 할렬발생 정도는 미약하였으며 할렬개수는 코팅처리재, 수증기댐처리재, 무처리재의 순으로 양호한 것으로 나타났다.
This study examined the effects of the drying rate, temperature distribution and vapor pressure on the surface checks occurring during the air circulating oven-drying of hollowed short Japanese larch (Larix Kaemferi C.) round posts treated with coating (CO) and vapor-dam (VD). The hollowed round posts could be dried from the green condition to a moisture content of approximately 8% in 72 to 144 hours. The temperature in the hole was higher than that inside of wood for Control and VD specimens, while VD specimen showed opposite distribution. The vapor pressure inside the wood was higher than that in the hole for the CO and VD specimens during hole drying stage. There were few surface checks found in the specimens but the number increased in order the of CO, VD and Control specimens.