This study was conducted to determine the effects of the humidity and gas composition on the quality of satsuma mandarins during their heat treatment, in an effort to reduce their acidity. To come up with different humidity and gas conditions, various plastic films were used. The fruits were wrapped with an 18-${mu}m$ high-density polyethylene (HDPE) punched film, a 30-${mu}m$ low-density polyethylene (LDPE) film, or a 100-${mu}m$ LDPE film just before treatment at $30^{circ}C$ for 55 hours. After heat treatment, the titratible acidity (TA) was significantly reduced while the soluble-solid content (SSC) showed no differences, which resulted in increased SSC/TA ratios in all the treatments. The fruits that were not wrapped with a film, however, which had low RH, developed higher ethanol and acetaldehyde contents than those wrapped with an 18-${mu}m$ HDPE punched film, which had high RH and a similar gas composition. Among the films, the higher the $CO_2$ concentration in the film was, the more the ethanol and acetaldehyde contents increased, which induced more off-flavor. It was thus concluded that high humidity and normal gas composition are favorable conditions for heat treatment to reduce the acidity of satsuma mandarins.