As the corner of wooden pagoda forms the roof by closely bordering left and right eaves on the various purlins and angle rafters, it is designed for every face to be recognized as front whose structure system increases load to bear proportionally. The corner of wooden pagoda is inseparable with the corner bracket set as it becomes stable thanks to the corner bracket set structurally and load burden under restrained structure makes the corner bracket set really important. Accordingly, this study could figure out some facts by analyzing corner bracket sets of Palsangjeon of Beobjusa Temple in Korea, Seokgatap of Bulgungsa Temple in China and Ojungtap of Beobryungsa Temple in Japan which were constructed with pure wooden structure. This study demonstrated that corner bracket set played a pivotal role in keeping balance of concentrated load of corner (corner of opening) in each floor that contributed to the stability of wooden pagoda structurally despite multiple duplications of floors and also figured out the outfit of corner bracket set was subject to the floor type and the cross section of Gongpo installed on top of Pyeongju. Wooden pagodas in 3 countries were two floor types of octagon and square, and employed different connection method between upper and lower floors. The difference between floor and duplication method determines the method of corner, but even different methods were sufficient to have entirety in every side by completing dynamic principle of corner bracket set even though old method had to solve the problem of concentrated load and it also confirms that it was essential Gongpo to prevent any deformation of corner.