In this study, spinning with a contact surface was introduced as a simple and energy-saving method to reduce spun yarn hairiness. Theoretical analysis indicated that yarn hairiness could be reduced via a sufficient long contact surface applied in other part of yarn formation zone in addition to spinning triangle. Then, a simple contact apparatus was installed on ring frame to validate the theoretical analysis. Results proved that yarn hairiness was reduced via a contact surface in the yarn formation zone. However, unevenness was deteriorated for most yarns spun with contact apparatus during the spinning, which might be due to fiber mass concentration. Most of yarns spun with contact apparatus had a lower strength than the conventional yarns. This might be because evenness deterioration to decrease yarn strength overpowered hairiness reduction to increase yarn strength for most yarns spun with a contact surface.