기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
녹차-숯-목재섬유 복합보드의 역학적 성능에 미치는 구성원료의 종류 및 배합비율의 영향
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 녹차-숯-목재섬유 복합보드의 역학적 성능에 미치는 구성원료의 종류 및 배합비율의 영향
저자명
박한민,허황선,성은종,남경한,임재섭,Park. Han-Min,Heo. Hwang-Sun,Sung. Eun-Jong,Nam. Kyeong-Hwan,Lim. Jae-Seop
간행물명
목재공학
권/호정보
2013년|41권 1호|pp.64-76 (13 pages)
발행정보
한국목재공학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

이 연구에서는 녹차-목재섬유 복합보드의 강도성능과 기능성을 보강한 건축내장재를 개발하기 위하여, 목재섬유에 녹차와 흑탄, 백탄, 활성탄 등 3종류의 숯을 혼합한 녹차-숯-목재섬유 복합보드를 제작하였고, 구성원료의 종류 및 그 배합비율이 복합보드의 정역학적 성능에 미치는 영향을 조사하였다. 녹차-숯-목재섬유 복합보드의 휨 강도성능은 백탄함유 복합보드에서 평균적으로 가장 높은 값을 나타내었으나, 숯의 종류에 따른 휨 강도성능의 차이는 크지 않았다. 그러나 그 값은 선행연구의 녹차-목재섬유 복합보드보다 현저한 휨 강도성능의 향상을 나타내었고, 녹차와 숯의 배합비율이 증가할수록 휨 강도성능의 감소가 확인되었다. 바인더로 사용된 요소수지의 종류에 따른 차이는 $E_1$급 요소수지를 사용한 복합보드가 $E_0$급 요소수지를 사용한 그것보다 높은 휨 강도성능을 나타냈지만, 양 수지간의 차이는 선행연구의 녹차-목재섬유 복합보드에 비해 현저히 감소하였다. 복합보드의 박리강도는 백탄 $$geq_-$$ 활성탄 > 흑탄함유 복합보드의 순이었고, 백탄함유 복합보드에서는 목재섬유로만 구성된 대조보드와 거의 비슷한 값을 나타내는 것이 확인되었다.

기타언어초록

In this study, eco-friendly hybrid composite boards were manufactured from green tea, three kinds of charcoals and wood fiber for developing interior materials to reinforce the strength performances and the functionalities in addition to performances of the green tea-wood fiber hybrid boards. The effects for the kind and the component ratio of raw materials on mechanical properties were investigated. Bending strength performances of hybrid composite boards were highest in the hybrid composite boards composed of green tea, fine charcoal and wood fiber on average. However, the difference caused by the kind of charcoals was not large. These values were was markedly improved than those of green tea - wood fiber hybrid composite boards reported in previous researches. And it was found that the bending strength performance decreased with increasing component ratios of green tea and charcoals. The difference between urea resins used as the binder showed the higher value in hybrid composite boards using $E_1$ grade urea resin than in those using $E_0$ grade urea resin, but the difference between hybrid composite boards manufactured by both resins decreased markedly than the green tea - wood fiber hybrid composite boards reported in previous research. The internal bond strength of hybrid composite boards was in the order of hybrid composite boards with fine charcoal, activated charcoal and black charcoal, and it was found that the hybrid composite boards with fine charcoal had a similar values to control boards composed of only wood fiber.