- 낮은 구속응력에 대한 주문진 표준사의 강도 및 변형 특성
- ㆍ 저자명
- 한영철,임현성,정상섬,Han. Young-Chul,Lim. Hyun-Sung,Jeong. Sang-Seom
- ㆍ 간행물명
- 韓國地盤工學會論文集
- ㆍ 권/호정보
- 2014년|30권 2호|pp.33-42 (10 pages)
- ㆍ 발행정보
- 한국지반공학회
- ㆍ 파일정보
- 정기간행물| PDF텍스트
- ㆍ 주제분야
- 기타
매우 낮은 구속응력에서의 모래의 전단강도 및 변형특성은 상대적으로 높은 구속응력의 경우와 매우 상이한 분포를 나타낸다. 따라서 낮은 응력상태를 보이는 지반 위에 놓인 얕은 기초와 제방 등의 안정성, 토석류 혹은 얕은 파괴의 안정성 검토와 실내에서 시행하는 각종 모델시험의 경우 이에 대하여 명확히 규명할 필요가 있다. 본 연구에서는 건조된 주문진 표준사를 대상으로 구속응력을 5kPa~300kPa로 하여 배수 삼축시험을 실시하였으며, 그 결과 내부마찰각(${phi}$) 및 변형계수($E_s$)가 구속응력(${sigma}{_c}^{prime}$)에 따라 크게 변하는 것을 확인하였으며, 이에 따라 구속응력에 대한 조밀 및 느슨한 모래의 내부마찰각과 변형계수의 상관관계식을 제안하였다.
The shear strength and deformation characteristics of granular soils at low confining stresses differ from those with high confining stresses. Thus, the clear understanding of geotechnical problems related to the low confining stress state such as the stability of shallow foundations, embankments, slope failure, debris flow characteristics and liquefaction as well as the various laboratory model tests is needed. In this study, drained triaxial compression tests with the cell pressures from 5 kPa to 300 kPa were performed on dry Jumunjin sand. The results show that the internal friction angle and deformation modulus are dependent on the confining stress. Also, the correlations between them on the dense and loose sand were established.