학지사 뉴논문

총 204건 검색

본문검색 결과만 보기

정확도순

최신순

등재순

발행기간

전체
최근 1년
최근 3년
직접입력

적용하기

본문검색

포함

제외

10개씩

141.

Interconnected meso/microporous carbon derived from pumpkin seeds as an efficient electrode material for supercapacitors

Mayakrishnan Gopiraman, Somasundaram Saravanamoorthy, Seung-Hyun Kim, Ill-Min Chung 한국탄소학회 Carbon Letters 9 Pages

한국탄소학회 Carbon Letters 2017, Vol.24 10 73-81 (9 pages)

Mayakrishnan Gopiraman, Somasundaram Saravanamoorthy, Seung-Hyun Kim, Ill-Min Chung 저
...
- 3,000원
electrode materials. The resultant porous carbons (PS-600, PS-700, PS-800, and PS-900) were utilized as electrode material for supercapacitors. To our delight, the PS-900 demonstrated a maximum specific capacitance (Cs) of 303 F g?1 in 1.0 M H2SO4 at a scan rate of 5 mV. The electrochemical impedance spectra confirmed the poor electrical resistance of the electrode materials. Moreover, the stability of the PS-900 was found to be excellent (no significant change in the Cs even after 6000 cycles).
142.

Relationships between dielectric properties and characteristics of impregnated and activated samples of potassium carbonate- and sodium hydroxide-modified palm kernel shell for microwave-assisted activation

Norulaina Alias, Muhammad Abbas Ahmad Zaini, Mohd Johari Kamaruddin 한국탄소학회 Carbon Letters 11 Pages

한국탄소학회 Carbon Letters 2017, Vol.24 9 62-72 (11 pages)

Norulaina Alias, Muhammad Abbas Ahmad Zaini, Mohd Johari Kamaruddin 저
...
- 4,000원
a mass ratio of 1.5) exhibited a high loss tangent (tan δ) indicating the effectiveness of these materials to be heated by microwaves. K2CO3 and NaOH can act as a microwave absorber to enhance the efficiency of microwave heating for low loss PKSs. Materials with a high moisture content exhibit a high loss tangent but low penetration depth. The interplay of multiple operating frequencies is suggested to promote better microwave heating by considering the changes in the materials characteristics.
143.

Synthesis and characterization of carbon doped TiO₂ photocatalysts supported on stainless steel mesh by sol-gel method

JO. Tijani, OO. Fatoba, TC. Totito, WD. Roos, LF. Petrik 한국탄소학회 Carbon Letters 12 Pages

한국탄소학회 Carbon Letters 2017, Vol.22 6 48-59 (12 pages)

JO. Tijani, OO. Fatoba, TC. Totito, WD. Roos, LF. Petrik 저
...
- 4,100원
This study synthesized pure anatase carbon doped TiO₂ photocatalysts supported on a stainless steel mesh using a sol-gel solution of 8% polyacrylonitrile (PAN)/dimethylformamide (DMF)/TiCl₄. The influence of the pyrolysis temperature and holding time on the morphological characteristics, particle sizes and surface area of the prepared catalyst was investigated. The prepared catalysts were characterized by several analytical methods: high resolution scanning electron microscopy (HRSEM), energy...
144.

The impact fracture behaviors of CFRP/EVA composites by drop-weight impact test

Sun-Ho Go, Hong-Gun Kim, Hee-Jae Shin, Min-Sang Lee, Hyun-Gyung Yoon, Lee-Ku Kwac 한국탄소학회 Carbon Letters 10 Pages

한국탄소학회 Carbon Letters 2017, Vol.21 4 23-32 (10 pages)

Sun-Ho Go, Hong-Gun Kim, Hee-Jae Shin, Min-Sang Lee, Hyun-Gyung Yoon, Lee-Ku Kwac 저
...
- 3,000원
A drop weight impact test was conducted in this study to analyze the mechanical and thermal properties caused by the changes in the ratio of carbon fiber reinforced plastic (CFRP) to ethylene vinyl acetate (EVA) laminations. The ratios of CFRP to EVA were changed from 10:0 (pure CFRP) to 9:1, 8:2, 6:4, and 5:5 by manufacturing five different types of samples, and at the same time, the mechanical/thermal properties were analyzed with thermo-graphic images. As the ratio of the CFRP lamination was...
145.

Effects of cross-linking methods for polyethylene-based carbon fibers: review

Kwan-Woo Kim, Hye-Min Lee, Jeong-Hun An, Byoung-Suhk Kim, Byung-Gak Min, Shin-Jae Kang, Kay-Hyeok An, Byung-Joo Kim 한국탄소학회 Carbon Letters 24 Pages

한국탄소학회 Carbon Letters 2015, Vol.16 No.3 2 147-170 (24 pages)

Kwan-Woo Kim, Hye-Min Lee, Jeong-Hun An, Byoung-Suhk Kim, Byung-Gak Min, Shin-Jae Kang, Kay-Hyeok An, Byung-Joo Kim 저
...
- 5,300원
In recent decades, there has been an increasing interest in the use of carbon fiber reinforced plastic (CFRP) in aerospace, renewable energy and other industries, due to its low weight and relatively good mechanical properties compared with traditional metals. However, due to the high cost of petroleum-based precursors and their associated processing costs, CF remains a specialty product and as such has been limited to use in high-end aerospace, sporting goods, automotive, and specialist...
146.

Preparation and thermal properties of polyethylene-based carbonized fibers

Kwan-Woo Kim, Hye-min Lee, Byoung Suhk Kim, Seon-Hwan Hwang, Lee-Ku Kwac, Kay-Hyeok An and Byung-Joo Kim 한국탄소학회 Carbon Letters 5 Pages

한국탄소학회 Carbon Letters 2015, Vol.16 No.1 10 62-66 (5 pages)

Kwan-Woo Kim, Hye-min Lee, Byoung Suhk Kim, Seon-Hwan Hwang, Lee-Ku Kwac, Kay-Hyeok An and Byung-Joo Kim 저
...
- 1,500원
In this study, carbonized fibers were prepared by using acidically cross-linked LDPE fibers. The surface morphologies of the carbonized fibers were observed by SEM. The effects of cross-linking process temperatures were studied using thermal analyses such as DSC and TGA. The melting and heating enthalpy of the fibers decreased as the cross-linking temperature increased. The cross-linked fibers had a carbonization yield of over 50%. From SEM results the highest yield of carbonized LDPE-based...
147.

Influence of hot-pressing pressure on the densification of short-carbon-fiber-reinforced, randomly oriented carbon/carbon composite

Thakur Sudesh Kumar Raunija and Sharad Chandra Sharma 한국탄소학회 Carbon Letters 9 Pages

한국탄소학회 Carbon Letters 2015, Vol.16 No.1 4 25-33 (9 pages)

Thakur Sudesh Kumar Raunija and Sharad Chandra Sharma 저
...
- 3,000원
The prime objective of this research was to study the influence of hot-pressing pressure and matrix-to-reinforcement ratio on the densification of short-carbon-fiber-reinforced, randomly oriented carbon/carbon-composite. Secondary objectives included determination of the physical and mechanical properties of the resulting composite. The ‘hybrid carbon-fiberreinforced mesophase-pitch-derived carbon-matrix’ composite was fabricated by hot pressing. During hot pressing, pressure was varied from 5...
148.

Removal of methylene blue using lemon grass ash as an adsorbent

Harminder Singh, Dawa Tshering B 한국탄소학회 Carbon Letters 8 Pages

한국탄소학회 Carbon Letters 2014, Vol.15 No.2 6 105-112 (8 pages)

Harminder Singh, Dawa Tshering B 저
...
- 3,000원
Wastewater from textile industries is a major cause of water pollution in most developing countries. In order to address the issues of water pollution and high cost for treatment processes, the use of an inexpensive and environmentally benign adsorbents has been studied. The objective was to find a better alternative to the conventional methods. Lemon grass waste (ash) collected from a lemon grass stream distillation subunit in Bhutan was tested for dye removal from aqueous solutions. The study...
149.

Superhydrophobic carbon-based materials: a review of synthesis, structure, and applications

Long-Yue Meng, Soo-Jin Park 한국탄소학회 Carbon Letters 16 Pages

한국탄소학회 Carbon Letters 2014, Vol.15 No.2 5 89-104 (16 pages)

Long-Yue Meng, Soo-Jin Park 저
...
- 4,500원
Materials with appropriate surface roughness and low surface energy can form superhydrophobic surfaces, displaying water contact angles greater than 150°. Superhydrophobic carbon-based materials are particularly interesting due to their exceptional physicochemical properties. This review discusses the various techniques used to produce superhydrophobic carbon-based materials such as carbon fibers, carbon nanotubes, graphene, amorphous carbons, etc. Recent advances in emerging fields such as...
150.

Preparation and application of reduced graphene oxide as the conductive material for capacitive deionization

Ayu Tyas Utami Nugrahenny, Jiyoung Kim, Sang-Kyung Kim, Dong-Hyun Peck, Seong-Ho Yoon, Doo-Hwan Jung 한국탄소학회 Carbon Letters 7 Pages

한국탄소학회 Carbon Letters 2014, Vol.15 No.1 5 38-44 (7 pages)

Ayu Tyas Utami Nugrahenny, Jiyoung Kim, Sang-Kyung Kim, Dong-Hyun Peck, Seong-Ho Yoon, Doo-Hwan Jung 저
...
- 3,000원
The physical and electrochemical characteristics of RGO material were evaluated and its desalination performance was tested with a CDI unit cell with a potentiostat and conductivity meter, by varying the applied voltage and feed rate of the salt solution. The performance of RGO was compared to graphite as a conductive material in a CDI electrode. The result showed RGO can increase the capacitance, reduce the equivalent series resistance, and improve the electrosorption capacity of CDI electrode.

한주간 이슈검색어